KYB Shocks & Struts Strut Mount Front Mazda 3 2013-2004 / Mazda 5 2013-2006 / Volvo C30 2013-2008

Shop alignment components, camber kits, caster kits, and adjustable control arms at Black Ops Auto Works. Find vehicle-specific parts for correcting suspension alignment or preparing a performance setup, including toe links, adjustment cams, camber plates, and replacement mounts. Choose components based on your vehicle, suspension configuration, and measured alignment needs. Camber, Caster, and Toe Correction Camber describes the inward or outward tilt of a wheel when viewed from the front. Caster describes the steering axis angle when viewed from the side. Toe describes whether the wheels point inward or outward when viewed from above. Each measurement has a different role, so the right correction part depends on which angle needs adjustment. This collection includes options from Black Ops Auto Works, AAD Performance, SPC Performance, Eibach, SuperPro, Whiteline, and other suspension brands. Adjustment capability varies by product. A camber kit does not automatically provide caster...

Shop KYB shocks, struts, mounts, protective components, steering stabilizers, and matched suspension packages by exact manufacturer part number and verified vehicle application. KYB Product Families The collection includes Excel-G, Gas-a-Just, MonoMax, AGX, Strut-Plus, Truck-Plus, K2.0, and application-specific KYB suspension service components. Choose Your Part Match the exact KYB manufacturer part number Confirm year, make, model, factory suspension, and ride height Verify front or rear position plus left or right side when specified Check whether springs, mounts, bearings, boots, bump stops, or hardware are included Review every current KYB application note before ordering Plan for professional installation and alignment when suspension geometry is affected Related Suspension Collections Shocks and Struts Coilovers Suspension Packages Suspension Parts Frequently Asked Questions Should KYB shocks or struts be replaced in pairs? Replacing both dampers on the same axle is gener...

Compare Mazda3 intake systems and body protection using generation, engine and sedan or hatchback body. Each accessory has its own year and mounting coverage. Engine and Intake Interfaces The displayed intake references distinguish earlier 2.0L/2.3L applications from later 2.5L versions. Match exact part number, sensor provisions, hoses and brackets. For an MZR-family damper, confirm installed engine, crank interface, pulleys and accessory drive. Engine displacement alone does not establish a complete installation. Hatchback and Sedan Protection Compare hood protectors by exact fascia or hood mounting and body style. The displayed sedan and hatchback references have different year ranges and attachment applications. For liners and window deflectors, match supplied rows, door configuration and in-channel or outside-mount design. Confirm retention and free pedal movement for front floor protection. Choose Your Part Identify generation, engine and body style. Match intake sensors and ...

Compare Mazda5 rear suspension-service parts and brake compounds using exact production and installed equipment. Keep shock, mount and protection-kit contents distinct. Rear Shocks and Mounts The displayed KYB references include individual rear shock applications and a separate rear mount. Confirm exact manufacturer number, year and mounting interfaces. Review mounts, boots, bump stops and hardware separately from the damper. A shared Mazda3 reference establishes coverage only where Mazda5 is explicitly supported. Brake Use and Engine Interfaces Match calipers, axle and pad shape before choosing DTC race or HP Plus compounds. Review operating, noise, rotor and preparation guidance for intended use. Miata dampers and RX-7 injectors require their own engine interfaces and should not be treated as Mazda5 applications. Confirm exact engine, pulleys, fuel-rail and connectors as applicable. Choose Your Part Record production and rear suspension equipment. Match shock and mount interfaces...

Shop shock mounts, strut mounts, camber plates, caster plates, pillowball upper mounts, motor mounts, and shock hardware from KYB, Tein, Cusco, Synergy Manufacturing, Ridetech, Progressive Suspension, Ground Control, Vorshlag, ISC Suspension, and other suspension mount manufacturers. Find OE-replacement strut mount kits, upgraded pillowball uppers for track and race use, adjustable camber and caster plates for lowered vehicles, heavy-duty off-road shock mounts, and application-specific mounting hardware for cars, trucks, SUVs, and off-road platforms. Shock and strut mounts wear out. Rubber isolators dry out, bearings fail, and the resulting clunks, vibrations, or alignment drift kill the ride quality even on a car with fresh dampers. This category covers everything from KYB direct-replacement strut mount kits for daily drivers to Cusco and Tein pillowball uppers for sport builds, plus dedicated camber and caster plates for lowered street, autocross, and track cars. Filter by moun...

Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...

Shop Volvo C30 intake and brake applications by production, engine and factory equipment. For T5 intake choices, confirm the complete turbo, sensor and air-path configuration before choosing a finish. T5 Intake Application The displayed Injen options name a 2007–2010 C30 T5 application. Verify the manufacturer part number and current year/engine coverage, including required sensors, hoses and mounting. Black and polished finishes should be compared after application and kit contents. A throttle, inlet or filter accessory is not automatically a complete intake system. Brakes and Rear Suspension Mounts Match pads and rotors to the installed caliper, dimensions and axle. Shared Focus or Mazda references still need exact C30 coverage. Choose street or competition compounds for actual use. Rear mounts require matching suspension geometry and hardware; a mount listing should not be treated as a complete shock assembly. Choose Your Part Identify production, T5/other engine and installed i...

Shop Volvo C70 brake applications by generation, body and installed calipers. Distinguish the earlier coupe/convertible from later convertible applications before choosing shared Volvo or Ford/Mazda components. Caliper Side and Generation A rear-left caliper naming 850/V70/C70/S70 requires its exact production and brake-package coverage. Do not extend it to every C70 generation. Match pad profile, rotor diameter/thickness and axle for each kit component. Shared model names do not substitute for identifying the installed caliper. Friction and Service Contents Choose HPS, HP+ or competition compounds for their intended conditions after confirming fit. Compare the exact pad specification and service needs. EBC kit series can combine different friction and rotor types. Review supplied rotors, pads and hardware and confirm both axles if ordering a multi-axle package. Choose Your Part Identify generation, coupe/convertible body and production. Match caliper side, pad profile and rotor di...

Find Volvo S40 intake and brake applications by generation, production and actual engine. Identify the current turbo, sensors and calipers before selecting shared-model components. T5 Intake Interfaces For a T5 intake, confirm the manufacturer part number against exact S40 production and engine. Match turbo connection, sensor arrangement, hoses and mounting. Choose black or polished finish after verifying application and full kit contents. A related C30 reference should not establish coverage for every S40 engine. Brake and Suspension Components Pads need the installed caliper, correct profile and axle; rotors need matching dimensions. Shared Ford/Mazda or motorsport headings require specific S40 support. Suspension mounts need correct position, geometry and hardware. Select friction for intended conditions, and keep mount packages distinct from complete damper assemblies. Choose Your Part Identify generation, production and actual engine. Match intake sensors, turbo interfaces and...

Shop Volvo V50 brake applications by production, engine and installed calipers. Identify factory or upgraded brake equipment before comparing shared Volvo, Ford or Mazda references. Front and Rear Pad Profiles Match caliper, pad shape, rotor dimensions and axle first. Focus ST and Mazdaspeed references require exact V50 coverage rather than platform similarity alone. Front and rear friction components serve separate assemblies. Check each part number when choosing a kit or ordering both axles. Street and Competition Service Kits Compare HPS, HP+ and DTC compounds for their intended conditions and operating range. A competition label does not establish better everyday suitability. EBC packages can use different compounds and rotor styles. Review hardware, rotors and supplied quantities so the package covers the planned service. Choose Your Part Identify production, engine and current brake package. Match each axle’s caliper, pad profile and rotor dimensions. Choose compound for actu...