View vehicle applications
Fitment notes and restrictions
Description
This MaxTrac lowering springs is designed for the verified 2007-2014 Chevrolet Tahoe application and the additional vehicles listed below. Use manufacturer part number 271220 and confirm 2wd, 4wd before ordering.
Key Features
- Delivers a 2 inch rear drop from stock ride height.
- Direct bolt-on replacement for the factory rear coil springs.
- MaxTrac 07-16 GM C/K1500 2WD/4WD 3-4in Rear Adj. Lowering Flip Kit.
- Hot wound coil construction for a spring rate that will not fade over time.
- Powder coated gray finish for corrosion resistance.
- Reinstall suspension components, torque to spec, and complete a rear alignment check.
Fitment
| Years | Make | Model | Application |
|---|---|---|---|
| 2007-2014 | Chevrolet | Tahoe | 2WD, 4WD |
| 2007-2014 | GMC | Yukon | 2WD, 4WD |
Specifications
| Manufacturer | MaxTrac |
|---|---|
| Manufacturer Part Number | 271220 |
| Product Type | Lowering Springs |
| Fitment Type | Vehicle specific |
| Position | Rear |
| Drivetrain | 2WD/4WD |
| Ride Height | 2in |
| Application Requirements | 2WD, 4WD |
What's Included
One new MaxTrac lowering springs identified by manufacturer part number 271220. Only components expressly listed for this exact part number are included.
About MaxTrac
MaxTrac Suspension develops lift, lowering, leveling, shock, spring, spindle, control-arm, and related suspension components for trucks and SUVs. Selection depends on the exact vehicle and factory suspension configuration.
Related MaxTrac Products
- Shop all MaxTrac products
- MaxTrac 14-16 GM C/K1500 2WD/4WD Extended/Crew Cab w/Cast Steel Susp. 2in Front Lowering Coils
- MaxTrac 14-16 GM C/K1500 2WD/4WD Single Cab w/Cast Steel Susp. 2in Front Lowering Coils
- MaxTrac 04+ Nissan Titan 2WD/4WD 2in Front Lowering Coils
Frequently Asked Questions
Will MaxTrac 271220 fit my 2007-2014 Chevrolet Tahoe?
That year, make, and model is listed. Confirm 2wd, 4wd, the factory suspension, production split, and every MaxTrac application note before ordering.
Will the vehicle need an alignment after installation?
Yes. Any suspension height or geometry change requires an alignment plus checks for tire clearance, steering travel, brake-line routing, headlight aim, and fastener torque.
What is included with MaxTrac 271220?
Only the components stated for this exact manufacturer part number are included. Confirm shocks, springs, blocks, brackets, control arms, hardware, and any required companion parts before installation.
Installation Instructions
Follow the current MaxTrac instructions and vehicle service information for this exact part number. Support the vehicle safely, verify every application condition, use specified torque values, check steering and brake-line travel, settle the suspension, and complete a professional alignment after any geometry or ride-height change.




