View vehicle applications
Fitment notes and restrictions
Description
This McLeod Racing multi-disc clutch kit for higher-capacity street or performance use. Correct selection depends on the complete vehicle and drivetrain application, clutch configuration, transmission interface, dimensions, and intended power level.
Key Features
- Dedicated 8-bolt aluminum flywheel with 168 tooth ring gear included.
- 1-1/8 inch by 26 spline input shaft compatibility.
- McLeod RST Street Twin Aluminum LS Engine 1-1/8 x 26 Spline 6-Bolt Crank Twin Disc Clutch.
- McLeod Hydraulic Throwout Bearing Kit for GM T56 Bolt-On Collar.
- Twin disc design rated to 800 horsepower.
- Before beginning installation of McLeod 6306807, inspect the flywheel mounting surface and pilot bearing bore for damage.
Fitment
| Years | Make | Model | Application |
|---|---|---|---|
| 2009-2015 | Cadillac | CTS | Confirm engine, transmission, spline, flywheel, production date, and all manufacturer notes |
| 2016-2023 | Chevrolet | Camaro | Confirm engine, transmission, spline, flywheel, production date, and all manufacturer notes |
| 2014-2019 | Chevrolet | Corvette | Confirm engine, transmission, spline, flywheel, production date, and all manufacturer notes |
Specifications
| Manufacturer | McLeod Racing |
|---|---|
| Manufacturer Part Number | 6306807 |
| Product Type | Clutch Kits - Multi |
| Fitment Type | Vehicle specific, verify drivetrain |
| Condition | New |
What's Included
One new McLeod Racing product in the exact configuration and quantity identified by manufacturer part number 6306807. Discs, pressure plates, flywheels, bearings, cylinders, lines, adapters, fittings, fasteners, fluid, and tools are included only when expressly listed.
About McLeod Racing
McLeod Racing develops clutch, flywheel, release, hydraulic, and drivetrain products for street and competition vehicles. Correct selection remains exact-vehicle, exact-drivetrain, exact-interface, and exact-part-number specific.
Related McLeod Racing Products
- Shop all McLeod Racing products
- McLeod RXT HD Twin GM LSA /LT4 1-1/8 x 26 Spline w/ 168T 8 Bolt Steel Flywheel
- McLeod Racing RST HD Twin w/ Steel Flywheel - 97-15 GM LS 6 Bolt Crank - 1-1/8 x 26 Spline - 168T
- McLeod Racing RST HD Twin w/ Steel Flywheel - 2009+ GM LS-X 8 Bolt Crank - 1-1/8 x 26 - 168T
Frequently Asked Questions
Will this McLeod Racing product fit my vehicle?
Match the listed year, make, and model, then confirm the engine, transmission, input-shaft spline, crank pattern, flywheel, release system, production date, and every manufacturer application note.
Should related clutch and flywheel components be inspected during installation?
Yes. Inspect the flywheel, release bearing, pilot support, hydraulics, fasteners, seals, and mating surfaces. Replace or service worn components according to the manufacturer and factory procedures.
Is a clutch break-in procedure required?
Follow the current instructions for the exact part number. Street friction materials commonly require controlled engagement cycles before full-load use, while race configurations may use a different procedure.
Installation Instructions
Follow the current McLeod Racing and factory service instructions for this exact part number. Verify every drivetrain interface before disassembly, inspect related wear components and seals, keep friction surfaces clean, use specified fasteners and torque sequences, bleed hydraulic components when applicable, confirm release travel, and complete the required break-in procedure before full-load use.




