Mishimoto BMW 2007-11 335i/335xi/135i 3.0L Black Performance Intercooler

Find BMW 1 Series M Coupe parts for the E82 M model, also known as the 1M. Its N54 engine, M-specific chassis and installed brake equipment define the application. Identify the M Coupe BMW identifies the 1 Series M Coupe with the N54 3.0L inline-six. Distinguish it from a 135i fitted with an M Sport package and from later M135i models when choosing engine or chassis components. For more model-focused selection guidance, see the BMW 1M collection. Retain the exact chassis and engine application when comparing related components. Build Around the Installed Systems For intake and charge-cooling work, identify the existing inlet, charge pipes, intercooler connections and any turbo changes. Compare complete kit contents before choosing companion hoses or adapters. For brakes and suspension, use explicit M-model coverage. Record caliper, rotor dimensions and material, suspension configuration and wheel clearance. A non-M E82 application should not be carried over to the M Coupe without ma...

Find BMW 135i parts with N54 or N55 engine identification established first. Intake connections, charge-cooling hardware and transmission details matter alongside the chassis and body. N54 and N55 Induction Applications BMW’s 2011 135i update introduced the N55 single twin-scroll turbo engine in place of the earlier twin-turbo application. Use engine identification and production details when comparing intake kits or companion components. Injen intake applications separate early twin-intake arrangements from N55 kits. Compare sensor connections, inlet routing, filter arrangement and heat-shield contents for the actual engine. Brakes and Chassis Components Choose pads and rotors by installed caliper, pad shape, axle and rotor dimensions. Review compound characteristics for street or competition use, then account for sensors and hardware. For coilovers and mounts, identify Coupe or Convertible body, chassis and existing suspension changes. Review spring compatibility, mounting content...

Find BMW 335i parts by engine generation, body and current build specification. N54 and N55 induction, charge-air and exhaust applications need separate consideration. Identify N54 or N55 Use engine identification to distinguish the twin-turbo N54 from the later N55 installation. Intake connections and charge-air hardware should follow that engine application. Record existing intake, charge pipe, intercooler and calibration changes before choosing companion components. For ignition service, use the required plug specification and any documented tuner requirements. Choose the System You Need Compare a complete exhaust with an axle-back, mid-pipe or conversion section. Check body routing, joining points, valve operation and the pieces retained from the existing system. For chassis work, match suspension and brakes to the actual body and drivetrain. Identify calipers and rotor material before comparing pad compounds or sensor kits. Choose Your Part Identify engine, body and drivetrain...

Choose BMW 335i xDrive parts with both the turbocharged engine and all-wheel-drive chassis identified. Engine and drivetrain coverage are separate checks within the same build. Engine and Charge-Air Configuration Establish N54 or N55 and the current intake, intercooler and charge-pipe arrangement. Match couplings, sensor ports and breather connections to the installed equipment. For an ignition or calibration-related purchase, retain the documented build requirements. A shared displacement does not establish compatibility across the engine generations. xDrive Installation Requirements Suspension must explicitly cover xDrive, the body and axle loads. Review front driveline clearance, damper travel and alignment requirements before changing ride height. Exhaust and engine accessories can have drivetrain-sensitive routing or clearance. Compare the exact installation instructions with the car’s existing configuration. Choose Your Part Identify N54 or N55 and body. Record charge-air and...

Find BMW 335xi parts for the turbocharged all-wheel-drive 3 Series. Match the exact engine and body before choosing induction or drivetrain-sensitive components. Twin-Turbo Induction Applications For an N54 installation, compare the complete inlet arrangement, meter or sensor provisions, heat shielding and mounting. A twin-inlet kit has a different application from a later single-inlet design. Use the kit’s stated body and production coverage. A coupe listing needs explicit confirmation for another body or the xi drivetrain. AWD Chassis and Controls Select suspension with xi coverage and correct axle loads. Review front-axle clearance and the manufacturer’s permitted lowering and alignment requirements. For a pedal controller, verify the accelerator connector and supported vehicle. Response adjustment is separate from increasing engine output or changing the engine calibration. Choose Your Part Identify engine, body and xi drivetrain. Compare twin-inlet connections and mounting. Ch...

Shop forced induction parts, turbochargers, supercharger kits, intercoolers and boost-control components at Black Ops Auto Works. Explore direct-fit upgrades and components for custom builds, plus blow off valves, wastegates, charge pipes, turbo inlets and replacement hardware. Match your engine, existing equipment and manufacturer part number to choose the right component for the job.The collection also includes Nitrous Express nitrous systems and Snow Performance water-methanol injection products. These are separate power-adder and charge-cooling options with their own fuel, control and installation requirements. A shared vehicle application does not make every component in a boosted build interchangeable.Shop Forced Induction Parts by SystemStart with the part of the system you are replacing or upgrading. A complete vehicle-specific kit, a standalone turbocharger and a replacement valve seal kit are different purchases; check the contents of the exact listing. Product family Wha...

Intercooler components for turbocharged and supercharged gas and diesel platforms are stocked at Black Ops Auto Works. Shop intercooler piping kits, silicone couplers, T-bolt clamps, end tanks, core upgrades, and intercooler hardware for daily driven trucks, JDM turbo platforms, European turbo cars, and domestic forced induction builds. Every product is filterable by year, make, model, trim, and engine so the correct fitment ships the first time. Black Ops Auto Works carries 903 intercooler component SKUs spanning gas and diesel applications. What This Collection Covers Intercooler components are the hardware that moves and cools compressed air between the turbo or supercharger and the intake manifold. This collection covers everything short of a complete intercooler core, including piping, couplers, clamps, brackets, end tanks, and diesel specific hot side and cold side hardware for trucks running higher boost and towing loads. Categories Included Aluminum and silicone intercoo...

Intercooler Kits for turbocharged Mustang EcoBoost, F-150 EcoBoost, WRX STI, EVO, Civic Type R, BMW N54 and N55, and other boosted builds are stocked at Black Ops Auto Works. Shop front-mount intercoolers, top-mount intercoolers, charge pipes, intercooler piping, silicone couplers, T-bolt clamps, direct-fit cores, FMIC kits, intake air cooling, boost pipes, hose kits, installation hardware for Mustang EcoBoost, F-150 EcoBoost, WRX STI, EVO, Civic Type R, Bronco Raptor, GR Corolla, Supra, and BMW turbo builds. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 206 Intercooler Kits SKUs across core placement, pipe routing, coupler size, charge pipe compatibility, and boost goals. What This Intercooler Kits Collection Covers Intercooler kits package the core, piping, couplers, clamps, and hardware needed to improve charge-air cooling on turbocharged cars and trucks. The correct system...

Shop Mishimoto radiators, intercoolers, hoses, oil coolers, catch cans, intake components, transmission coolers, wheel hardware, and vehicle accessories by exact application, dimensions, connections, and manufacturer part number. Choose Your Part Match the complete year, make, and model when vehicle fitment is listed Confirm the engine, transmission, body configuration, production date, and factory interfaces For universal products, verify every dimension, thread, connection, orientation, and clearance Check the selected color, finish, quantity, and included hardware before ordering Shop Mishimoto Products All Mishimoto Products Mishimoto Catch Cans Mishimoto Fan Shrouds Mishimoto Cooling Products Frequently Asked Questions How do I confirm a Mishimoto product fits my vehicle? Match the listed year, make, and model, then confirm the engine, transmission, body configuration, production date, factory interfaces, and every current Mishimoto application note. How do I select a univ...