Click to zoom in
Open Up the FK8 Exhaust Path with a Direct-Fit Comp RS System
MXP MXCRFK8 is a vehicle-specific cat-back exhaust for the 2017-2021 Honda Civic Type R. Its stainless construction, straighter flow path, larger-diameter design, and chrome tips replace the factory cat-back section without changing the vehicle application.
Key Features
- Comp RS cat-back layout developed for the FK8 Honda Civic Type R
- Stainless steel construction for corrosion resistance and long-term exhaust service
- Larger-diameter routing and straighter pipe geometry support smoother exhaust flow
- Chrome exhaust tips provide the standard finish for MXP MXCRFK8
- Vehicle-specific mounting layout developed and tested on US-market vehicles
- Sport-oriented exhaust sound for the listed Civic Type R application
Fitment
| Years | Make | Model | Trim | Chassis | Requirements |
|---|---|---|---|---|---|
| 2017-2021 | Honda | Civic | Type R | FK8 | Factory-location cat-back replacement |
Specifications
| Detail | Value |
|---|---|
| Manufacturer part number | MXCRFK8 |
| Series | Comp RS |
| Product type | Cat-back exhaust system |
| Material | Stainless steel |
| Tip finish | Chrome |
| Installation position | Rear cat-back section |
| Vehicle scope | Vehicle specific |
| Emissions equipment | Retains the upstream catalytic converter |
What's Included
- One MXP Comp RS cat-back exhaust system, part MXCRFK8
About MXP
Established in 2007 by Mackin Industries, MXP develops vehicle-specific exhaust components through US test fitting and dyno evaluation. Application-selected pipe sizing and mandrel-bent routing support smooth exhaust flow while retaining practical fitment.
FAQ
What is the MXCRFK8?It is a stainless Comp RS cat-back exhaust with chrome tips for the 2017-2021 Honda Civic Type R.
Which Civic models does this exhaust fit?It fits the 2017-2021 Honda Civic Type R with the FK8 chassis, including the 2021 Limited Edition.
Does it fit non-Type R Civic models?No. The mounting layout and rear body configuration are specific to the Civic Type R.
What material is the system made from?The system uses stainless steel construction for exhaust heat and corrosion resistance.
What finish do the tips have?This configuration uses chrome exhaust tips.
Does it replace the catalytic converter?No. It replaces the cat-back section located behind the upstream catalytic converter.
What should be inspected during installation?Check all gaskets, hanger engagement, pipe clearance, tip alignment, and joint seating before tightening.
How should the system be maintained?Allow the exhaust to cool before cleaning, use a nonabrasive cleaner on the tips, and inspect clamps and hangers during routine service.
Is a warranty included?The part is sold as a new MXP product with manufacturer warranty coverage subject to MXP terms and proof of purchase.
Installation Instructions
- Confirm the vehicle is a 2017-2021 Honda Civic Type R and verify the package before lifting the car.
- Work on a fully cooled exhaust, raise the vehicle at approved lift points, and support it securely.
- Apply penetrating lubricant to the factory cat-back fasteners and rubber exhaust hangers.
- Support the factory exhaust, disconnect the rear cat-back joints, and remove the factory section from its hangers.
- Transfer any reusable factory hardware only where the vehicle service procedure requires it.
- Assemble MXCRFK8 loosely from the front connection toward the rear while engaging each hanger.
- Center the pipes and chrome tips with safe clearance from the bumper, heat shields, suspension, and underbody.
- Tighten the connections evenly to the applicable service specifications without pulling the system out of alignment.
- Start the engine in a ventilated area, inspect every joint for leaks or contact, and correct alignment before road use.
- After the first complete heat cycle, allow the system to cool and recheck all connections and clearances.
Proposition 65 Warning
WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov.
Catback
A catback exhaust system replaces everything from the catalytic converter back, covering the mid pipe, muffler, and tailpipe section in one bolt on upgrade. This collection covers catback systems for trucks, Jeeps, muscle cars, imports, and performance SUVs, giving you a straightforward way to improve sound, exhaust flow, and rear end styling without touching the factory catalytic converters or front pipe. Catback systems are available in stainless steel and titanium construction, with dual rear exit, single exit, and quad tip configurations, and a range of sound levels from mild touring tone to aggressive track character. Whether you want a deeper daily driver sound or a full track ready exhaust note, you will find a matched system for your platform here. What This Category Covers This collection includes complete catback exhaust systems, cat-back kits, dual rear exit systems, axle back adjacent catback upgrades, stainless steel and titanium exhaust systems, and street, tourin...
View Catback Products
Exhaust Systems
Performance exhaust systems for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop cat-back systems, axle-back systems, turbo-back systems, headers, downpipes, mid-pipes, mufflers, resonators, catalytic converters, exhaust tips, exhaust valve controllers, oxygen sensors, exhaust brakes, and motorcycle and powersports exhausts for Mustang, Camaro, Challenger, Corvette, Silverado, and Super Duty platforms. Every product is filterable by exhaust position, material, pipe diameter, and vehicle year, make, model, and trim so the correct fitment ships the first time. Black Ops Auto Works carries 7,441 exhaust SKUs across every position of the exhaust system. What This Category Covers Exhaust upgrades change sound, appearance, and in some cases power. Exhaust fitment depends on engine, drivetrain, and factory exit position, so confirm the exact platform before ordering any exhaust component. Exhaust Position Cat-back, axle-back, turbo-back, and header-back systems e...
View Exhaust Systems Products
MXP
Welcome to the MXP Collection, where we celebrate excellence in auto servicing through our curated selection of products. Founded in 2000, Mackin Xtreme Product has established itself as a leader in the San Francisco area for all things automotive. Our passion for both classic and modern vehicles drives us to offer only the best tools and accessories for car enthusiasts and everyday drivers alike. Why Choose MXP? Expertise: Our team consists of the finest mechanics with extensive training and experience. Technology: We stay updated with the latest advancements while respecting classic car knowledge. Personal Care: We understand how important your car is, and we treat every vehicle as if it were our own. Our Commitment At MXP, we pride ourselves on our craftsmanship. Our mechanics undergo rigorous training, ensuring that every new team member learns from seasoned professionals. We believe that learning the tricks of the trade is essential, and we strive to share our passion and...
View MXP Products