Click to zoom in
XL Carbon Fiber Racing Seat with FIA 8855-1999 Homologation for Larger Drivers
The OMP HA0-0779-B01-071 HTE-R Carbon XL Racing Seat extends the acclaimed HTE-R carbon fiber shell design into an extra-large fitment without compromising on FIA 8855-1999 homologation. Built for drivers who require additional shoulder and hip room, the HA0-0779-B01-071 delivers the same competition-grade carbon fiber construction and AIRNET breathable lining as the standard HTE-R Carbon while accommodating a broader driver profile. Side-mounted with 5 harness holes and HANS-compatible shoulder slots, this seat is designed for track days, rally, and circuit racing. Sold as a single seat.
Key Features
- Carbon fiber shell in XL sizing for drivers requiring additional shoulder and hip clearance
- FIA 8855-1999 homologated for use in sanctioned motorsport competition
- HANS-compatible shoulder harness slot design
- AIRNET breathable lining for improved ventilation during racing
- 5 harness holes compatible with 4-point, 5-point, and 6-point harness systems
- Side mounting (Type W) with 289mm inner spacing
- Increased external shoulder width for XL fitment
- Anti-counterfeiting hologram included with FIA homologation documentation
- Black finish
Specifications
| Detail | Value |
|---|---|
| Part Number | HA0-0779-B01-071 |
| Brand | OMP |
| Series | HTE-R Carbon XL |
| Shell Material | Carbon Fiber |
| Size | XL |
| Homologation | FIA 8855-1999 |
| HANS Compatible | Yes |
| Harness Holes | 5 |
| Mounting Style | Side (Type W, 289mm inner spacing) |
| Color | Black |
| Sold As | Single seat |
| UPC | N/A |
What's Included
- 1x OMP HA0-0779-B01-071 HTE-R Carbon XL Racing Seat
- FIA homologation card with anti-counterfeiting hologram
- Mounting hardware not included (seat brackets sold separately)
Frequently Asked Questions
What makes the OMP HTE-R Carbon XL different from the standard HTE-R Carbon?The HA0-0779-B01-071 XL version features wider external shoulder dimensions and increased hip clearance compared to the standard HTE-R Carbon. It retains the same carbon fiber construction, FIA 8855-1999 homologation, and HANS-compatible design, making it ideal for larger drivers who need additional room without sacrificing competition safety standards.
Is the OMP HTE-R Carbon XL FIA approved for competition?Yes. The HA0-0779-B01-071 is FIA 8855-1999 homologated and approved for use in FIA-sanctioned events. Each seat includes a homologation card and anti-counterfeiting hologram. Verify that the homologation is current before use in sanctioned competition.
What harness systems fit the OMP HTE-R Carbon XL?The seat features 5 harness holes and accommodates 4-point, 5-point, and 6-point harness systems. The HANS-compatible shoulder slots allow use with head and neck restraint systems as required by most sanctioning bodies.
What mounting brackets does the OMP HTE-R Carbon XL use?The HA0-0779-B01-071 uses side mounting (Type W) with a 289mm inner side spacing. OMP and compatible aftermarket brands offer vehicle-specific mounting brackets. Per FIA regulations, four M8 grade 8.8 bolts minimum are required for proper installation.
Does the OMP HTE-R Carbon XL include seat rails or mounting hardware?No. Mounting brackets and seat rail adapters are sold separately. Confirm compatibility with your vehicle's floor pan and roll cage mounting points before purchasing brackets.
What is the shell weight of the OMP HTE-R Carbon XL seat?The carbon fiber shell weight is approximately 10.3 kg for the XL version. FIA 8855-1999 weight figures refer to the complete seat with a 10 percent tolerance.
What types of racing is the OMP HTE-R Carbon XL suitable for?The HA0-0779-B01-071 is suited for circuit racing, rallying, rally cross, time attack, and track day use where FIA 8855-1999 approval is required or desired. Its XL dimensions make it particularly well-suited for GT class and endurance racing applications where driver size is a consideration.
Is the OMP HTE-R Carbon XL street legal?The HA0-0779-B01-071 is a competition racing seat. Street legality depends on local regulations. Consult applicable vehicle codes and safety requirements before installing in a street-registered vehicle.
Installation Notes
- Select vehicle-specific OMP Type W side mount brackets compatible with your roll cage or floor mounting points
- Remove the factory seat and disconnect all airbag and occupant detection wiring per your vehicle service manual
- Mount seat using four M8 grade 8.8 bolts minimum as required by FIA regulations
- Route a compatible 4-point or greater harness through all five harness slots before use
- Install and verify HANS device compatibility before use in any sanctioned event
- Confirm that the FIA homologation card is present and the homologation is current
WARNING: This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.
Interior Parts & Accessories
Interior parts and accessories for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop gauges and gauge pods, dash and interior trim, shift knobs and shifters, steering wheels, seats and race seats, seat belts and harnesses, roll cage components, floor mats, programmers and tuners, and racing safety gear for Hellcat, Trackhawk, TRX, HEMI, LS, LT, Coyote, and EcoBoost platforms. Every interior product is filterable by year, make, model, trim, and application so the correct part ships the first time. Black Ops Auto Works carries 5,234 interior SKUs across dash trim, seating, safety, electronics, and tuning categories. What This Category Covers Interior parts and accessories span daily comfort upgrades and dedicated racing safety equipment. This collection ranges from simple dash badges and floor mats to full roll cage components, race seats, and harness bars for track-prepped builds, along with electronic tuning products like programmers and performance monitor...
View Interior Parts & Accessories Products
Seats
Seats parts and accessories are stocked at Black Ops Auto Works. Racing seats, bucket seats, reclining sport seats and off road suspension seats for track cars, drift builds, Jeeps and UTVs are stocked at Black Ops Auto Works. Shop FIA approved fixed back seats, composite shells, aluminum seats, reclining seats, suspension seats, seat brackets, sliders and harness ready options. Every product is filterable by year, make, model, trim, engine and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 79 Seats SKUs across trusted aftermarket brands and vehicle applications. What This Seats Collection Covers Vehicle Specific Parts A performance seat can improve driver support and positioning during track use, trail driving and spirited street driving. Choose the seat shell, width, mounting system and safety equipment for the vehicle and intended use. Fixed Back and FIA Racing Seats Details That Matter Fixed back seats provide high lateral support and a rig...
View Seats Products
Seats & Accessories
Seats and seating accessories for Jeep Wrangler and CJ, Ford Super Duty, Toyota Tacoma, and racing and track builds are stocked at Black Ops Auto Works. Shop racing seats, reclineable seats, seat covers, seat belts and harnesses, seat brackets and frames, seat cushions and pads, and seat releases from PRP, OMP, NRG, Covercraft, and Rugged Ridge. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 642 Seats & Accessories SKUs across racing seat, seat cover, harness, and mounting hardware categories. What This Category Covers The Seats & Accessories category groups together every part related to in cabin seating for daily driven trucks, off road rigs, and dedicated race builds. Coverage spans direct fit factory replacement seats, FIA rated composite racing seats, custom fit seat covers, harness style seat belts, seat mounting brackets and frames, and comfort accessories like c...
View Seats & Accessories Products