CATCH CAN KIT, PCV, 09-15 CADILLAC CTS-V
SKU: 20-1562-FL
Starting in 2004 with the Gen IV LS engines, General Motors replaced the PCV valve with a 2.5mm fixed orifice. This move was, presumably, to save production costs and eliminate a serviceable part. NOTE: A PCV valve serves a few purposes in the crankcase; promote negative pressure and prevent boost pressure. Also, in the event of a backfire, the PCV valve prevents combustible vapors from igniting in the crankcase.
The Radium Engineering PCV catch can kit improves the performance of the LSA crankcase ventilation system. The catch can runs inline between the PCV valve and the intake manifold. The included bracket (below) replaces the OEM intercooler coolant filler bracket and mounts the catch can.
When the intake manifold pressure is close to or greater than atmospheric pressure, the PCV "check" valve closes and, thus, this hose experiences no flow. Conversely, the PCV hoses will experience "metered" vacuum when the engine is idling, steady state cruising, and decelerating. This would normally draw unwanted crankcase vapor, unspent fuel, and oil sludge into the intake manifold immediately after a high load run.
Because the OEM 2.5mm orifice port is restrictive, a replacement baffled oil cap is included to draw as much blowby from the crankcase as possible.
INCLUDES:
-Baffled oil catch can
-Baffled oil cap replacement
-O-ring sealed aluminum PCV valve
-CTS-V specific mounting bracket
-AN adapter fittings and hose ends
-Stainless steel hardware
-Radium PCV hose
NOTES:
1. The PCV catch can kit is compatible and recommended to be used with the CCV catch can kit. See 20-0563-FL below.
2. No extra inline check valve is required since Radium catch cans are pressure sealed.
Engine
Engine parts and engine bay upgrades for Dodge, Jeep, RAM, Chrysler, Chevrolet, Ford, Toyota, Nissan, Subaru, and Honda vehicles are stocked at Black Ops Auto Works. Shop oil catch cans, supercharger pulleys, thermostats, radiators, cooling parts, throttle bodies, intake manifolds, headers, ignition coils, spark plugs, sensors, gaskets, fuel pumps, valve covers, engine covers, billet cap covers, and full engine bay dress-up parts for HEMI, Hellcat, Trackhawk, Redeye, Demon, Scat Pack, RAM TRX, LS, LT, Coyote, EcoBoost, K-Series, and 2JZ builds. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 14,298 engine SKUs across performance, cooling, oil control, ignition, and appearance categories. What This Category Covers The Engine collection combines OEM-replacement engine service parts with performance aftermarket upgrades for supercharged, turbocharged, and naturally aspirated builds...
View Engine Products
Oil Catch Cans
Oil catch cans for HEMI, LS, LT, and turbocharged platforms are stocked at Black Ops Auto Works. Shop billet aluminum catch cans, mild and wild capacity kits, and direct-fit systems for the Dodge Challenger and Charger Hellcat, Jeep Grand Cherokee Trackhawk, Ram 1500 TRX, Chevrolet Corvette C7, and Chevrolet Camaro platforms. Every product is filterable by AN fitting size, horsepower rating, and vehicle year, make, model, and engine so the correct catch can ships the first time. Black Ops Auto Works carries 440 oil catch can SKUs across mild and wild capacity systems. What This Category Covers Oil catch cans intercept oil vapor and blow-by gases from the PCV system before they recirculate into the intake tract, reducing carbon buildup on intake valves and preventing oil-fouled sensors and intercoolers on turbocharged and supercharged engines. Mild Versus Wild Capacity Mild catch can kits use a smaller AN fitting size, typically 6AN or 8AN, sized for stock to moderately modified ...
View Oil Catch Cans Products
Oil Systems
Oil system parts for supercharged HEMI, LS and LT platforms, diesel trucks, and daily drivers are stocked at Black Ops Auto Works. Shop oil catch cans, air oil separators, oil filters, oil pans, oil pumps, oil pickups, dipsticks, drain plugs, and motor oils for Hellcat, Redeye, Demon, Jeep Trackhawk, Ram TRX, Corvette, Camaro, CTS-V, Mustang, F-150, and Silverado applications. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 1,432 oil system SKUs across catch cans, filtration, and service hardware. What This Category Covers Oil system parts manage crankcase ventilation, filtration, and lubrication delivery throughout the engine. This collection spans oil catch cans, oil separators, air oil separators, oil filters, oil pans, oil pumps, oil pickups, dipsticks, drain plugs, oil baffles, and motor oils for street, track, towing, and high horsepower applications. Crankcase Ventilation...
View Oil Systems Products
Radium Engineering Fuel System Parts
Radium Engineering fuel system parts are stocked at Black Ops Auto Works for JDM, European, and domestic performance platforms. Shop fuel rails, fuel pressure regulators, surge tanks, fuel hangers, catch cans, and billet fittings engineered in house by Radium for high horsepower and flex fuel builds. Every product is filterable by year, make, model, trim, and engine so the correct part ships the first time. Black Ops Auto Works carries 724 Radium Engineering SKUs across import and domestic platforms. What This Collection Covers Radium Engineering builds fuel delivery hardware, catch cans, and billet fittings for platforms including Honda, Mazda RX-7 and RX-8, Mitsubishi Evo, Nissan 240SX and 350Z, Toyota Supra, BMW E36 and E46, Ford Coyote and Mustang, and Corvette C7 and Z06. This collection covers the parts needed to build a reliable high flow fuel system for naturally aspirated, turbocharged, and flex fuel applications. Categories Included Fuel rails and fuel rail kits, adjus...
View Radium Engineering Fuel System Parts Products


