View vehicle applications
Fitment notes and restrictions
Description
The ShockWave mounts just like a coiloverand replaces the coil-spring with an adjustableair spring for a huge range of tuning options.
Key Features
- Repeat on the opposite side, then cycle the suspension and check for clearance before driving.
Fitment
Use the complete application table and confirm any suspension, brake, drivetrain, and factory-equipment requirements stated for this exact part number.
| Years | Make | Model | Submodel |
|---|---|---|---|
| 1991-1996 | Buick | Caprice | All applicable trims |
| 1991-1996 | Buick | Fleetwood | All applicable trims |
| 1991-1996 | Buick | Impala | All applicable trims |
| 1991-1996 | Buick | Roadmaster | All applicable trims |
| 1991-1996 | Cadillac | Caprice | All applicable trims |
| 1991-1996 | Cadillac | Fleetwood | All applicable trims |
| 1991-1996 | Cadillac | Impala | All applicable trims |
| 1991-1996 | Cadillac | Roadmaster | All applicable trims |
| 1991-1996 | Chevrolet | Caprice | All applicable trims |
| 1991-1996 | Chevrolet | Fleetwood | All applicable trims |
| 1991-1996 | Chevrolet | Impala | All applicable trims |
| 1991-1996 | Chevrolet | Roadmaster | All applicable trims |
| 1991-1996 | Oldsmobile | Caprice | All applicable trims |
| 1991-1996 | Oldsmobile | Fleetwood | All applicable trims |
| 1991-1996 | Oldsmobile | Impala | All applicable trims |
| 1991-1996 | Oldsmobile | Roadmaster | All applicable trims |
Specifications
| Manufacturer | Ridetech |
|---|---|
| Manufacturer part number | 11312401 |
| Product type | Air Suspension Kits |
| Condition | New |
| Suspension Location | Front |
| Package dimensions | 2 × 2 × 2 in |
| Package weight | 18 lbs |
What's Included
One new Ridetech air-suspension kit matching manufacturer part number 11312401, with the components and hardware supplied by Ridetech for this exact configuration.
Brand Information
Ridetech develops application-specific coilover, air-suspension, steering, and chassis systems in Jasper, Indiana, with product families engineered for street performance, ride control, and installation as complete matched systems.
Related Parts
Frequently Asked Questions
Will this fit my vehicle?
Match the complete year, make, model, and any listed submodel in the fitment table. Also verify every drivetrain, suspension, brake, and factory-equipment note stated by Ridetech for this part number before ordering.
What must be checked before operating the air system?
Verify the electrical load, fuse and ground requirements, fitting sizes, line routing, pressure rating, leak-free connections, and any required height-sensor calibration for this exact Ridetech system.
Installation Instructions
Support the vehicle and unload the suspension before removing the original dampers or springs. Install the Ridetech components in the specified position, verify hose and reservoir clearance where present, torque fasteners at the instructed suspension position, then perform alignment and controlled road testing.




