-12%
Sold out
Click to zoom in
Long Travel Height Matched to the Rubicon's Unique Hardware
The Skyjacker G452RKMLT is a 4.5 inch dual rate long travel suspension lift kit built specifically for the Jeep Gladiator JT Rubicon trim, accounting for the Rubicon's unique front and rear axles, electronic sway bar disconnect system, and factory off road hardware. This kit pairs dual rate coil springs with a 3 inch rear coil spring lift and Skyjacker's M95 shocks, delivering long travel performance that works with the Rubicon's existing off road equipment rather than against it. The dual rate spring design keeps the ride comfortable during daily driving while supporting the load and articulation demands of serious trail use. Skyjacker built the G452RKMLT as a Rubicon specific counterpart to its standard Gladiator kit because the Rubicon's factory components require different geometry and clearance than other Gladiator trims. Owners running larger tires on a Rubicon and building a dedicated overland or trail rig rely on the G452RKMLT as a complete long travel solution matched to their trim's factory hardware.
Key Features
- 4.5 inch dual rate long travel suspension lift
- 3 inch rear coil spring lift included
- Skyjacker M95 Hydro shocks front and rear
- Engineered specifically for the Gladiator Rubicon's axles and sway bar disconnect system
- Dual rate coil springs balance comfort and load capacity
- Supports larger tire and wheel packages for off road articulation
Fitment Table
| Year Range | Make | Model | Trim |
|---|---|---|---|
| 2020 | Jeep | Gladiator | Rubicon |
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | G452RKMLT |
| Brand | Skyjacker |
| Lift Height | 4.5 inches front, 3 inches rear |
| Shock Type | M95 Hydro |
| Spring Type | Dual Rate Coil |
| UPC | Not Published |
What's Included
- Dual rate front coil springs
- 3 inch rear coil springs
- M95 Hydro shocks, front and rear
- Long travel suspension arms and mounting hardware compatible with Rubicon axles
About Skyjacker
Skyjacker Suspensions builds trim specific long travel kits for platforms like the Gladiator JT Rubicon, recognizing that factory off road hardware such as the electronic sway bar disconnect requires unique lift geometry. The G452RKMLT reflects that trim specific engineering.
Related Parts
- Skyjacker G452KMLT long travel kit for non Rubicon Gladiator trims
FAQ
What is the G452RKMLT?The G452RKMLT is a Skyjacker 4.5 inch dual rate long travel suspension lift kit built specifically for the Jeep Gladiator JT Rubicon trim, including 3 inch rear coil springs and M95 shocks.
Why is there a separate kit for the Rubicon trim?The Rubicon uses unique axles and an electronic sway bar disconnect system that require different lift geometry than other Gladiator trims, so Skyjacker built a Rubicon specific kit.
Will the G452RKMLT fit a non Rubicon Gladiator?No, non Rubicon Gladiator trims should use Skyjacker's G452KMLT kit instead.
Does the G452RKMLT include shocks?Yes, Skyjacker M95 Hydro shocks are included front and rear as part of the kit.
How much lift does the G452RKMLT provide?The kit provides up to 4.5 inches of front lift and 3 inches of rear lift using the included coil springs.
Does the G452RKMLT work with the Rubicon's sway bar disconnect?Yes, the kit is engineered to work with the Rubicon's factory electronic sway bar disconnect system.
Is the G452RKMLT a long travel kit?Yes, the kit is designed for long travel performance, offering more suspension articulation than a standard lift kit.
Is professional installation recommended for the G452RKMLT?Yes, due to the complexity of a long travel suspension system and the Rubicon's unique hardware, professional installation is recommended.
Install Instructions
- Park the Gladiator Rubicon on level ground and support the frame with jack stands at the front and rear lift points.
- Remove all four wheels.
- Support the front and rear axles with a floor jack to relieve suspension tension.
- Remove the factory shocks, coil springs, and related suspension arms, noting the sway bar disconnect wiring.
- Install the Skyjacker long travel suspension arms and coil springs at the front and rear per the included instructions.
- Install the M95 Hydro shocks at the upper and lower mounts using factory and supplied hardware.
- Reconnect the sway bar disconnect system and track bar per the included instructions.
- Reinstall the wheels, lower the vehicle, torque all hardware to specification, and have the alignment checked.
Prop 65 Warning
California residents: This product can expose you to chemicals known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
Lift Kits
Shop lift kits, suspension lift kits, coilover lift kits, Pro-Truck lift kits, Stage 1, Stage 2, and Stage 2R lift systems, leveling kits, front strut spacer kits, rear lift blocks, coil spring lift kits, component boxes, upper control arms, lift springs, and reservoir shocks from Eibach, Skyjacker, Zone Offroad, Tuff Country, Belltech, MaxTrac, Fabtech, Rancho, and other truck and off-road suspension manufacturers. Find complete suspension lift packages, front-only strut leveling kits, rear-only block and shackle kits, Jeep and Gladiator component boxes with ADX M2.0 aluminum monotube shocks, Rancho QuickLift loaded struts, and lift hardware sized for daily-driven trucks, weekend adventure builds, and dedicated overland platforms. A properly matched lift kit raises ride height, opens up tire and wheel clearance, corrects factory rake on trucks and SUVs, and adds the ground clearance needed for larger tires and off-road use. This collection covers everything from 1.5-inch front s...
View Lift Kits Products
Skyjacker
Skyjacker suspension parts are stocked at Black Ops Auto Works for Jeep, Ford, Chevrolet, GMC, RAM, and Toyota trucks and 4x4 vehicles. Shop lift kits, leveling kits, dual rate coil springs, Black Max, Nitro 8000, Hydro 7000, and ADX M2.0 shocks, steering stabilizers, upper control arms, and suspension hardware. Every product is filterable by year, make, model, trim, and drivetrain so the correct Skyjacker part ships the first time. Black Ops Auto Works carries 1,596 Skyjacker SKUs across lift, leveling, and off-road suspension categories. What This Collection Covers Skyjacker builds off-road suspension systems for trucks and Jeeps that need more ground clearance, better ride control, improved steering stability, and stronger trail capability. Skyjacker is best known for lift kits, leveling kits, and long travel coil springs. Product Categories Lift kits and component boxes, leveling kits and strut spacers, dual rate and long travel coil springs, Black Max, Nitro 8000, Hydro 700...
View Skyjacker Products
Suspension
Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...
View Suspension Products