View vehicle applications
Description
Route small-diameter lines from one continuous bulk roll
Ticon Industries 132-04100-0001 is a 100-foot roll of black silicone hose with a 5/32-inch or 4 mm nominal inside diameter. It is a universal dimension-based supply for custom automotive routing, so pressure, vacuum, fluid, temperature, bend radius, fitting size, and environmental compatibility must be confirmed for the intended circuit.
Key Features
- One continuous 100-foot bulk roll
- 5/32-inch or 4 mm nominal inside diameter
- Black silicone hose construction
- Flexible routing for measured custom applications
- Bulk length can be cut to the required service runs
- Universal supply with no year-make-model application
Fitment
| Application Type | Verified Requirements |
|---|---|
| Universal dimension-based hose | Requires a 5/32 in / 4 mm nominal inside diameter. Verify outside diameter, fitting barb size, pressure or vacuum, fluid compatibility, temperature, bend radius, abrasion protection, clamps, and total required length. |
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | 132-04100-0001 |
| Material | Silicone |
| Color | Black |
| Nominal Inside Diameter | 5/32 in / 4 mm |
| Roll Length | 100 ft |
| Configuration | Bulk hose roll |
| Fitment | Universal dimension-based |
| Barcode | Matches the manufacturer part number |
What's Included
- One 100-foot roll of black 4 mm silicone hose
- Fittings, clamps, heat sleeves, abrasion guards, cutters, and installation labor are not included
About Ticon Industries
Ticon Industries supplies tubing, couplers, fittings, and fabrication materials for performance automotive builds. Bulk hose products are selected by exact dimensions and service conditions rather than by a broad vehicle list.
Related Parts
- No internal fitting or clamp is linked because barb diameter, retention method, pressure, fluid, temperature, and installation environment must be chosen together.
FAQ
What is the 132-04100-0001?It is one 100-foot roll of black silicone hose with a 5/32-inch or 4 mm nominal inside diameter.
Does this hose fit a specific vehicle?No. It is a universal bulk supply that must be selected by dimensions and service requirements.
Is the listing for 100 individual pieces?No. It is a bulk 100-foot roll intended to be measured and cut for individual runs.
Can it carry every automotive fluid?No. Confirm chemical compatibility with the exact fluid or vapor before installation.
Can it be used on a pressurized circuit?Only when the verified pressure, temperature, fitting, and retention requirements of the complete circuit are within the hose specification.
What fitting size is required?Use a barb or fitting intended for 4 mm nominal inside-diameter hose and verify engagement and retention before service.
How should the hose be routed?Avoid kinks, sharp edges, moving components, exhaust heat, electrical hazards, and unsupported spans.
What should be checked after installation?Inspect every connection for leaks, collapse, swelling, abrasion, heat damage, loosening, and contact after initial operation.
Installation Instructions
- Identify the exact circuit and confirm hose material, diameter, pressure or vacuum, fluid, and temperature requirements.
- Measure the route with allowance for engine movement and service access without creating loops that can snag or kink.
- Cut the hose squarely with a clean tool and remove debris without damaging the bore.
- Push the hose fully onto compatible fittings and install the retention method specified for the circuit.
- Support the route away from exhaust heat, sharp edges, belts, fans, steering, suspension, and electrical terminals.
- Pressure- or vacuum-test as appropriate, then reinspect the hose and every connection after the first operating cycle.
