Shop alignment kits, correction hardware and mounting components at Black Ops Auto Works. Compare SPC shims, Fabtech cam hardware, Pedders camber-plate options and Zone Offroad cam lockouts for the particular correction your suspension needs. Start with measured wheel angles and the actual suspension setup, then choose the component that addresses that position.
Shims, Cams and Fixed Correction
A shim or offset bushing can provide a defined correction where the vehicle’s suspension design permits it. For example, the listed SPC Honda Fit rear toe shim specifies a fixed change for its application. Choose the correction amount and orientation from the alignment measurements and the manufacturer instructions.
Fabtech alignment cams, bolts and related kits provide another application-specific adjustment route. Compare the supplied hardware, axle coverage and component quantity so a small service kit covers the repair you intend.
Camber Plates and Cam Lockouts
Pedders camber-plate references serve particular vehicle and strut or suspension-kit arrangements. Compare the upper mounting design and adjustment function with the dampers already installed. Sharing a vehicle name does not establish compatibility with every strut or coilover system.
Zone Offroad’s Bronco cam lockout plates use selectable lockout positions to help secure the chosen alignment position. That is a different adjustment and retention method from simply replacing an eccentric cam. Have the setup measured and select the required position using the exact kit instructions.
Supporting Steering and Driveline Components
The group also includes steering-stabilizer, sway-bar lock and driveline-relocation references. These address their own damping, movement or mounting tasks; they should not be treated as interchangeable ways to change wheel camber, caster or toe. Choose them for the specific system being serviced.
For a lifted or lowered vehicle, measure at the intended driving height and inspect the existing joints, bushes and mounts. Build the order around the actual adjustment required, then plan the final alignment with the installer.
Choose Your Part
- Use an alignment report to identify the angle and axle requiring correction.
- Compare a fixed-change shim, adjustable cam, plate or lockout solution.
- Match the exact chassis, mounting position and installed suspension.
- Review adjustment range, supplied quantity and final alignment work.
Frequently Asked Questions
What is the difference between a shim and an adjustable arm?
A shim supplies the correction specified for its application and orientation. An adjustable arm changes a particular mounting relationship within its stated range. Choose according to the suspension design and measured correction needed.
Do I automatically need an alignment kit after lowering or lifting?
Have the vehicle measured at the intended operating height. A correction component may be needed when the appropriate settings cannot be reached with the available factory adjustment.
What do Bronco cam lockout plates do?
The listed Zone Offroad design uses selectable positions to help hold the alignment setting. Choose the exact application and position as part of the measured alignment setup.
Will a steering stabilizer correct camber, caster or toe?
A steering stabilizer has a separate damping function. It is not a substitute for measuring wheel alignment and choosing the appropriate correction hardware.
Does one kit cover both sides or every alignment angle?
Contents and adjustment functions vary. Review the supplied quantity, axle and mounting positions, and the angles the particular kit can change.
Related Collections
Alignment Components · Camber Kits · Caster Kits · Control Arms