Click to zoom in
BRExhaust 106-0868 exhaust kit for 2008-2017 Toyota Sequoia 5.7L
BRExhaust designed this direct-fit replacement exhaust kit for the 2008-2017 Toyota Sequoia with the 5.7L engine. The manufacturer identifies the manufacturer part number as 106-0868 and engineers the multi-piece system for a bolt-on replacement of the original exhaust path.
Key Features
- Precision mandrel-bent pipes support consistent routing and exhaust flow.
- The 106-0868 kit uses durable aluminized steel construction.
- Multi-piece, bolt-on design helps route components around axles, crossbars, and brackets.
- No bending or welding is required according to the manufacturer product page.
- Perforated-tube muffler design with an aluminized steel muffler body.
- Designed as a direct-fit replacement for the listed Toyota Sequoia application.
- Covered by a two-year warranty from the manufacturer.
Fitment
| Year Range | Make | Model | Notes |
|---|---|---|---|
| 2008-2017 | Toyota | Sequoia | 5.7L engine; 106-0868 direct-fit replacement exhaust; engineered for OEM 174200S040 |
The manufacturer page does not list additional trim or drivetrain restrictions. Confirm the vehicle configuration before installation.
Specifications
| Detail | Value |
|---|---|
| Brand | BRExhaust |
| MPN | 106-0868 |
| Product type | Direct-fit replacement exhaust system |
| Series | Direct-Fit Exhaust |
| Pipe material | Aluminized steel |
| Muffler type | Perforated tube |
| Muffler body material | Aluminized steel |
| Construction | Multi-piece, bolt-on, adjustable design |
| OEM replacement reference | 174200S040 |
| UPC | 888563182728 (Shopify barcode; not specified on the manufacturer page) |
What's Included
- The 106-0868 package includes the manufacturer-specified hardware kit
- One 2.5-inch ball flare clamp
- One 2.5-inch U-bolt clamp
- One gasket ring
- Two 2.25-inch U-bolt clamps
- Two two-bolt gaskets
- Four bolts and four nuts
About BRExhaust
BRExhaust, a MagnaFlow Group company, develops direct-fit replacement exhaust systems intended to restore fit and function with application-specific components. The 106-0868 kit is built around the Toyota Sequoia application listed above.
Related Parts
FAQ
What is the 106-0868?It is a BRExhaust direct-fit replacement exhaust kit for the listed Toyota Sequoia application.
Which vehicles does this kit fit?It is listed for 2008-2017 Toyota Sequoia models with the 5.7L engine.
What material is used?The pipes and muffler body use aluminized steel.
Does installation require welding?No. The manufacturer describes a multi-piece, bolt-on installation that requires no bending or welding.
What components are supplied?The package includes the listed clamps, gaskets, bolts, nuts, and hardware kit.
What warranty is provided?The manufacturer lists a two-year warranty.
What should be checked before ordering?Confirm the year, model, 5.7L engine, exhaust routing, and original-equipment configuration before ordering.
Is a Proposition 65 warning stated?No product-specific Proposition 65 statement is provided on the manufacturer product page.
Install Instructions
- Review the manufacturer installation guide and confirm the vehicle application before starting.
- Park on a level surface, allow the exhaust to cool, and use appropriate vehicle support and eye protection.
- Compare the new components with the original exhaust and confirm that all clamps, gaskets, bolts, nuts, and the hardware kit are present.
- Remove the original exhaust as directed by the vehicle service information.
- Position the replacement components around axles, crossbars, and brackets, then bolt them together without bending or welding.
- Align the system, tighten all fasteners to the applicable manufacturer or vehicle service specifications, and inspect clearances.
- Start the engine, check for leaks and contact, and recheck fasteners after the initial heat cycle.
Catback
A catback exhaust system replaces everything from the catalytic converter back, covering the mid pipe, muffler, and tailpipe section in one bolt on upgrade. This collection covers catback systems for trucks, Jeeps, muscle cars, imports, and performance SUVs, giving you a straightforward way to improve sound, exhaust flow, and rear end styling without touching the factory catalytic converters or front pipe. Catback systems are available in stainless steel and titanium construction, with dual rear exit, single exit, and quad tip configurations, and a range of sound levels from mild touring tone to aggressive track character. Whether you want a deeper daily driver sound or a full track ready exhaust note, you will find a matched system for your platform here. What This Category Covers This collection includes complete catback exhaust systems, cat-back kits, dual rear exit systems, axle back adjacent catback upgrades, stainless steel and titanium exhaust systems, and street, tourin...
View Catback Products
Exhaust Systems
Performance exhaust systems for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop cat-back systems, axle-back systems, turbo-back systems, headers, downpipes, mid-pipes, mufflers, resonators, catalytic converters, exhaust tips, exhaust valve controllers, oxygen sensors, exhaust brakes, and motorcycle and powersports exhausts for Mustang, Camaro, Challenger, Corvette, Silverado, and Super Duty platforms. Every product is filterable by exhaust position, material, pipe diameter, and vehicle year, make, model, and trim so the correct fitment ships the first time. Black Ops Auto Works carries 7,441 exhaust SKUs across every position of the exhaust system. What This Category Covers Exhaust upgrades change sound, appearance, and in some cases power. Exhaust fitment depends on engine, drivetrain, and factory exit position, so confirm the exact platform before ordering any exhaust component. Exhaust Position Cat-back, axle-back, turbo-back, and header-back systems e...
View Exhaust Systems Products
MagnaFlow
MagnaFlow exhaust systems for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop MagnaFlow Street Series cat-back systems, axle-back exhausts, mufflers, direct-fit catalytic converters, resonators, and exhaust tips for Chevrolet Silverado, Ford F-150, RAM 1500, Jeep Wrangler and Gladiator, Nissan 350Z, Toyota Tacoma and Yaris, and Volkswagen and BMW platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 922 MagnaFlow SKUs across cat-back, axle-back, muffler, and catalytic converter categories. What This Brand Covers MagnaFlow is known for straight-through stainless steel mufflers, a signature deep tone, and one of the widest direct-fit vehicle applications in the aftermarket exhaust industry, including gas and diesel trucks, SUVs, muscle cars, and import platforms. Core Product Families Street Series cat-back systems deliver a bold, aggressive tone for d...
View MagnaFlow Products