Complete the front exhaust section on a compatible 2023-2026 Honda Civic Type R with this MXP 70 mm stainless front pipe. The bolt-on FL5 component connects the factory-location exhaust sections and must be matched to the existing catalytic and cat-back interfaces.
Fitment
| Years | Make | Model | Application Notes |
|---|---|---|---|
| 2023-2026 | Honda | Civic | Type R, FL5 chassis |
Specifications
| Brand | MXP |
|---|---|
| Manufacturer Part Number | MXFPFL5 |
| Product Type | Front exhaust pipe |
| Fitment Type | Vehicle Specific |
| Condition | New |
| Product Type | Front exhaust pipe |
| Pipe Diameter | 70 mm |
| Material | Stainless steel |
| Installation | Bolt on |
What's Included
One MXP 70 mm stainless front pipe. Confirm the current package hardware and gasket contents and obtain any required replacement sealing components before installation.
About MXP
MXP is a Mackin Industries performance brand focused on vehicle-specific exhaust components. Its systems use application-selected materials, routing, and outlet configurations that must be matched to the complete vehicle and existing exhaust layout.
Related MXP Products
- Shop all MXP products
- MXP Comp RS Cat-Back Exhaust for 2017-2021 Honda Civic Type R
- MXP SP T304 Cat-Back Exhaust for 2009-2012 Hyundai Genesis Coupe 2.0T
- MXP SP T304 Quad-Tip Exhaust for Toyota 86 TRD and Subaru BRZ
Frequently Asked Questions
Will MXP MXFPFL5 fit my vehicle?
Match the listed year, make, and model, then confirm every trim, chassis, engine, rear-valance, factory-exhaust, and interface note shown for this exact part number.
Can this front pipe be used with any cat-back?
Only when the inlet and outlet locations, diameters, flanges, gaskets, clearances, and emissions configuration are compatible. Confirm every interface before ordering.
What should be checked after installation?
Inspect every joint for leaks, verify hanger seating and safe bumper, suspension, heat-shield, and underbody clearance, then recheck fastener tension and outlet alignment after the first complete heat cycle.
Installation Instructions
Allow the exhaust to cool fully, support the vehicle and exhaust safely, follow the factory service procedure, install all sections loosely from front to rear, seat the hangers and seals, align the outlets with safe clearance, torque all hardware to the applicable specifications, inspect for leaks or contact, and recheck the system after its first heat cycle.
Connecting Pipes
Shop exhaust connecting pipes, midpipes, front pipes, link pipes, and extension sections at Black Ops Auto Works. Find vehicle-specific and fabrication components from Borla, Kooks, Stainless Works, Solo Performance, Dinan, AWE, Akrapovic, Invidia, MBRP, and other exhaust brands. Match each pipe to both adjoining exhaust components, the vehicle configuration, and the exact manufacturer part number. Exhaust Midpipes and Link Pipes Explore replacement middle sections, resonated midpipes, non-resonated pipes, and link-pipe sets for selected BMW M models, Ford Mustang and Explorer, Subaru WRX, Nissan Z, Jeep Grand Cherokee, Dodge Durango, and other applications. Confirm whether the section connects to factory equipment or requires a specific aftermarket exhaust system. Front Pipes, Over-Pipes, and Up-Pipes This collection includes front-pipe kits, Subaru turbo up-pipes, BRZ and FR-S over-pipes, and selected Civic Type R front pipes. These names describe different locations within an exh...
View Connecting Pipes Products
Exhaust Systems
Shop performance exhaust systems, cat-backs, axle-backs, headers, mufflers, and exhaust tips at Black Ops Auto Works. Compare options from Borla, CORSA, Solo Performance, AWE, MagnaFlow, MBRP, Kooks, Akrapovic, Invidia, and other brands. Find complete systems and individual components for muscle cars, performance SUVs, trucks, imports, and European vehicles. Cat-Back and Axle-Back Exhaust Systems Choose the exhaust section that matches your project. Cat-back systems generally replace the exhaust downstream of the catalytic converter, while axle-back systems replace the rear section. Exact connection points and package contents vary by vehicle. Compare muffler design, pipe diameter, exit location, tip configuration, and compatibility with existing exhaust components. Exhaust for HEMI, SRT, Trackhawk, and Hellcat Vehicles This collection includes exhaust options for selected Jeep Grand Cherokee SRT and Trackhawk, Dodge Durango SRT and Hellcat, Dodge Charger, Chrysler 300, and Ram appl...
View Exhaust Systems Products
Mid Pipes
Shop exhaust mid-pipes, X-pipes, H-pipes, connecting pipes, and muffler replacement sections at Black Ops Auto Works. Explore vehicle-specific assemblies and universal fabrication components from Borla, CORSA, Dinan, Kooks, Stainless Works, MBRP, AWE, Solo Performance, and other brands. Compare connection layouts, pipe dimensions, sound-control features, and installation requirements for your exact exhaust configuration. Exhaust Mid-Pipes and Connecting Sections A mid-pipe forms part of the connection between the front and rear portions of an exhaust system. Depending on the vehicle, this assembly may contain a crossover, resonator, catalytic converter, or connecting tubes. The term describes a position within the system, not one universal component design. This collection includes performance middle exhaust assemblies, lead pipes, replacement front pipes, extension sections, and other connecting components. Identify which section your project requires before choosing a part. A whee...
View Mid Pipes Products
MXP
Shop MXP cat-back exhaust systems, front pipes, and performance exhaust components at Black Ops Auto Works. MXP exhaust systems are available for Toyota GR Corolla, Honda Civic Type R, Toyota 86, Subaru BRZ, and Hyundai Genesis Coupe applications. Choose the correct system by exact vehicle fitment, engine, chassis, exhaust layout, pipe diameter, outlet configuration, and manufacturer part number. MXP Cat-Back Exhaust Systems MXP Comp RS and SP T304 cat-back exhaust systems are designed for performance vehicles that need application-specific routing, fitment, and outlet placement. Available options include systems for the 2023 and newer Toyota GR Corolla, 2017 to 2021 Honda Civic Type R, 2023 and newer Honda Civic Type R, Toyota 86, Subaru BRZ, and 2009 to 2012 Hyundai Genesis Coupe 2.0T. MXP Front Pipes and Exhaust Pipes Upgrade the exhaust path with MXP front pipes designed for select performance applications. The collection includes a 70 mm front pipe for the 2023 and newer Honda ...
View MXP Products


