Click to zoom in
Step Up Your 2014-2025 Ford F-150 Stance with the Zone Offroad ZONF4301 3-Inch Pre-Assembled Loaded Strut
The Zone Offroad ZONF4301 is a pre-assembled loaded strut for the 2014-2025 Ford F-150 4WD that delivers 3 inches of front lift. As a direct replacement for the factory front strut, the ZONF4301 eliminates the compromise of stacking a spacer on top of an aging factory strut by replacing the entire assembly with a purpose-built unit calibrated for the raised ride height. The loaded design combines the spring, upper mount, and strut body into a single factory-assembled unit, so no spring compressor is required during installation. Zone Offroad covers the ZONF4301 with their Factory Protection Plus warranty program, including limited lifetime coverage and ESC system compliance testing. This listing is for a single strut. Two units are required to complete the front pair.
Key Features
- Pre-assembled loaded strut for 2014-2025 Ford F-150 4WD
- Delivers 3 inches of front lift as part of a complete suspension system
- Spring, upper mount, and strut body fully assembled for tool-free strut spring removal
- Zone Factory Protection Plus: limited lifetime warranty and ESC compliance
- Direct replacement for the factory F-150 front strut position
- Sold as a single unit
Vehicle Fitment
| Year Range | Make | Model |
|---|---|---|
| 2014-2025 | Ford | F-150 |
Specifications
| Detail | Value |
|---|---|
| Part Number | ZONF4301 |
| Brand | Zone Offroad |
| Lift Height | 3 inches (front) |
| Type | Loaded strut (pre-assembled) |
| Quantity | Single strut |
| Fitment | 2014-2025 Ford F-150 4WD |
| Warranty | Factory Protection Plus Limited Lifetime Warranty |
| UPC | N/A |
What's Included
- 1x Zone Offroad ZONF4301 3-inch pre-assembled loaded strut (single)
About Zone Offroad
Zone Offroad designs lift kits and suspension components backed by Factory Protection Plus, which combines a limited lifetime warranty, ESC system compliance testing, and a 5-year/100,000-mile drivetrain warranty. Zone Offroad builds all lift systems to maintain factory ESC system functionality, making them a trusted choice for daily-driven trucks.
Related Parts on Our Site
Frequently Asked Questions
What is the Zone Offroad ZONF4301?The Zone Offroad ZONF4301 is a pre-assembled 3-inch loaded front strut for the 2014-2025 Ford F-150 4WD. It replaces the entire factory front strut assembly with a unit engineered for 3 inches of front lift. It is sold as a single strut and is covered under Zone Offroad's Factory Protection Plus warranty.
How many ZONF4301 struts do I need for my F-150?This listing is for a single strut. A complete front strut replacement requires two units. Order two of the ZONF4301 to equip both the driver and passenger front positions on your 2014-2025 F-150.
Is there a spring compressor required to install the ZONF4301?No. The loaded strut design has the spring pre-compressed and assembled at the factory. The ZONF4301 installs as a complete unit without the need for a spring compressor, which simplifies the installation and eliminates a significant safety risk associated with servicing strut springs.
What is the difference between the ZONF4301 and ZONF4601?Both are pre-assembled loaded struts for the 2014-2025 and 2014-2026 Ford F-150 4WD respectively. The ZONF4301 delivers 3 inches of front lift and the ZONF4601 delivers 6 inches. Select the lift height appropriate for your suspension build and desired stance.
Will the ZONF4301 work with my F-150 if it has MagneRide suspension?Zone Offroad lift struts are generally not compatible with factory MagneRide magnetic ride control. Confirm your F-150 trim and suspension package before ordering. Vehicles equipped with MagneRide typically require specialty lift components designed for that system.
What size tires fit with a 3-inch lift on the 2014-2025 F-150?A 3-inch lift on the 2014-2025 Ford F-150 typically accommodates up to 33 or 35-inch tires depending on wheel offset and backspacing. Refer to Zone Offroad's recommended wheel and tire guide for your specific year and cab configuration.
What does Zone Offroad's Factory Protection Plus warranty cover?Factory Protection Plus includes a limited lifetime warranty against defects in material and workmanship, FMVSS 126 ESC system compliance testing, and a 5-year/100,000-mile drivetrain warranty. This coverage is provided to the original retail purchaser and is transferable to the vehicle.
Can the ZONF4301 be installed at home?Yes. The ZONF4301 is designed as a bolt-in replacement that does not require welding or cutting. Standard hand tools plus a torque wrench are sufficient. A front end alignment is required after installation. If you are not comfortable performing suspension work, professional installation is recommended.
Installation Instructions
- Safely lift and support the vehicle on jack stands at the frame rails with the front suspension hanging free.
- Remove the front wheel and tire on the side being serviced.
- Support the lower control arm or steering knuckle with a floor jack to avoid overextending the CV axle.
- Disconnect the sway bar end link and any brake line brackets or ABS sensor clips from the factory strut.
- Access the upper strut tower and remove the factory strut top mount nuts.
- Remove the lower strut-to-knuckle bolt(s) and extract the factory strut assembly.
- Insert the Zone Offroad ZONF4301 loaded strut into the strut tower. Align upper mounting studs and hand-thread the tower nuts.
- Install and hand-thread the lower mounting bolt(s) through the steering knuckle.
- Torque all fasteners to Zone Offroad specifications per the included instruction sheet.
- Reinstall brake line brackets, ABS clips, and sway bar end link.
- Reinstall the wheel and torque lug nuts to spec.
- Repeat on the opposite side, then perform a full front end alignment.
WARNING: This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.
Shocks and Struts
Shocks and struts for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop front and rear shocks, loaded strut assemblies, monotube shocks, twin-tube shocks, reservoir shocks, and steering dampers for daily drivers, lifted trucks, tow rigs, off-road builds, and muscle cars on Hellcat, Trackhawk, TRX, HEMI, LS, LT, Coyote, and EcoBoost platforms. Every shock and strut is filterable by year, make, model, trim, drivetrain, front or rear position, and ride height so the correct part ships the first time. Black Ops Auto Works carries 5,188 shock and strut SKUs across construction type, application, and vehicle use. What This Category Covers Shocks and struts damp spring oscillation so the tire stays planted on the road and are the most common suspension replacement job on any vehicle. A shock absorber is a standalone damping unit that bolts between the chassis and axle or lower control arm. A strut is a structural suspension member that combines damping with the sp...
View Shocks and Struts Products
Suspension
Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...
View Suspension Products
Zone Offroad
Zone Offroad lift kits, leveling kits, suspension components, and truck accessories help build capable pickups, Jeeps, and SUVs without losing focus on vehicle-specific geometry. Shop applications for Silverado and Sierra, Ford F-150 and Super Duty, Ram 1500 and HD, Jeep Wrangler JK and JL, Gladiator, Grand Cherokee, and more. Black Ops Auto Works carries 139 Zone Offroad SKUs across spacer lifts, coil and strut systems, body lifts, control arms, steering parts, sway bar links, and hardware. Filter by year, make, model, drivetrain, cab style, and existing ride height. Zone Offroad Lift and Leveling Kits Zone Offroad offers suspension systems that raise ride height for tire clearance, trail capability, and a more balanced truck stance. Leveling kits address factory front rake while full lift systems can include struts, coils, brackets, and supporting hardware. Two to six inch configurations A modest leveling kit suits drivers seeking front lift and larger tires. Taller systems ma...
View Zone Offroad Products